The different types of 10GB XENPAK Transceivers For Sales From Fiberstore

Fiberstore supply some fiber optic products.The most popular product sales was the optical module.The optical module is composed by the optoelectronic devices, the functional circuit and the optical interface, the optoelectronic device includes a transmitter and receiver in two parts. Emitting portion is: enter a certain bit rate signal by the internal driver chip processing to drive a semiconductor laser (LD) or a light emitting diode (LED) to emit a corresponding rate of the modulated optical signal, the automatic control circuit with an internal optical power, so that the optical signal output power is kept stable. Receiving portion that is: the input module of a certain bit rate of the optical signal into an electrical signal by light detecting diode conversion. After preamplifier output electrical signal of the corresponding bit rate.

Nowadays,I will recommended Cisco XENPAK-10GB Transceivers.Then what is the XENPAK-10GB Transceivers, XENPAK-10GB Transceivers have what types in, XENPAK-10GB Transceivers how long working wavelength?

Cisco offers a wide range of Xenpak transceivers that operate with copper line, multimode optical fiber line and single mode optical fiber line. Typical copper Cisco Xenpak (Xenpak-10gb-CX4) max span is 15 meters, typical multimode Cisco Xenpak include Xenpak-10gb-LX4,Xenpak-10gb-LRM and Xenpak-10gb-SR, these modules fit to use with both 50/125 and 62.5/125 multimode fiber and their working distance max is 300 meters. Typical single mode Cisco Xenpak transceivers are Xenpak-10gb-LR, Xenpak-10gb-LW, Xenpak-10gb-ER, Xenpak-10gb-ZR; these transceivers operate with single mode optical fiber and their working distance range from 10km to 80km max.

Next, we used two types of products with XENPAK-10GB-LR vs XENPAK-10GB-ER to answer the above questions.

Cisco XENPAK-10GB-LR is single mode Cisco fiber optic transceiver for 10G Ethernet, XENPAK-10GB-LR max working distance is 10km over common single mode G 652 optical fiber. XENPAK-10GB-LR use duplex SC fiber optic interface to connect the network, the other end of the XENPAK-10GB-LR transceiver will fit into the relevant slot or port on the switch or routers. XENPAK-10GB-LR typical working wavelength is at 1310nm.

Cisco XENPAK-10GB-ER is Cisco fiber optic transceiver for 10 Gigabit network, XENPAK-10GB-ER max working distance is 40km, XENPAK-10GB-ER working wavelength is 1550nm over single mode G 652 optical fiber. XENPAK-10GB-ER is fully compatible with IEEE standards for 10Gig network; this fiber transceiver dimension is about 121 x 36 x 18 mm and its weight less than 300g. XENPAK-10GB-ER fiber optic transceiver use duplex LC fiber connector interfaces to connect the fiber optic network.
Cisco currently supports many different port types where each one is optimized for the reach and transmission media demanded by a particular 10 Gigabit application.

The different to them was the Wavelength and Transfer Distance.XENPAK-10GB-LR Wavelength and Transfer Distance was 1310nm and 10km ;and the XENPAK-10GB-ER Wavelength and Transfer Distance was 1550nm and 40km.If you want to know more information with 10GB XENPAK Transceivers,welcome to our store.

FiberStore produce and stock for a full range of optical transceivers. All our fiber transceivers are 100% compatible with major brands like Cisco, HP, Juniper, Nortel, Force10, D-link, 3Com, and backed by a lifetime warranty. Buy with confidence. We can customize optical transceivers to fit your specific requirements. Contact us if you can't find the item which you need.