A type of Fiber Test Equipment - Visual Fault Locators In Fiberstore

FiberStore offers many kinds of fiber optic testing equipment. For example,common used fiber optic test equipment included fiber optic power meter, fiber optic light source, fiber multimeter, optical time domain reflectometer (OTDR) and fiber fault locator. In this article,I am going to detail the Visual Fault Locators.

Visual Fault Locators:

Fiber optic fault locator is really a small size as well as simple test equipment utilized to locate the optical fiber linking faults, there are many models with different output power. Fiber optic fault locator can detect the curvature point or break reason for the fiber glass. It is traditionally used in telecommunications, CATV and fiber optic projects.

Visual fault locator (also known as laser fault locator or 650nm fault locator) is a handheld device using 650nm or 635nm visible laser source that emits a bright beam of laser light in to a fiber, allowing an individual to visually detect a fiber fault for up to 5 km.

Laser Fault Locators provide the capacity to trace fiber routes for end-to-end continuity. Locate breaks inside the deadzone of your OTDR, bad splices, potential fiber problems due to imperfections in addition to microbends and macrobends. These units can also be used as fiber identifiers. They can are powered by multimode or singlemode fibers in addition to the transmission wavelength. Visible beams make results easily noticeable. Laser fault locators are perfect instruments for locating fiber faults as well as other anomalies the location where the pulse width from the laser utilized in OTDRs won't allow measurements to be made. Applications include LAN, WAN, fiber data links, telephone and CATV.

With one of these fault locators it is possible to isolate high losses and faults in optical fiber cables. The intense beam of 650nm or 635nm sore point inside a fiber allows you to see a break like a glowing or blinking sore point. Two versions can be obtained: one with a universal port for two main.5mm ferrule connectors (FC, SC, ST, E2000, DIN), and something including an adapter which allows use with 1.25mm ferrule connectors as well (LC, MU).

Features of FOFS's type of Visual Fault Locator(Laser Fault Locator):

• Both CW and pulsed mode are available

• Lightweight (handheld and pen shape available)

• Long continuous operation time

• Cost effective solution

Aside from the Visual Fault Locators,FiberStore also offer a full array of fluke test equipment.From industrial electronic installation, maintenance and repair, to precision measurement and qc, Fluke tools help keep business and industry world wide up and running. Typical customers and users include technicians, engineers, medical-device manufacturers, and computer network professionals - those who stake their reputations on the tools, and use tools to assist extend their personal power and abilities.

Note:When selecting optical fiber test equipment, along with be thinking about the function and quality of equipment, and a few is basically that you should focus on:For example, the significant wavelength (typical is 1310nm, 1550nm and 850nm), fiber light source type, fiber optic glass type (single mode or multimode), fiber connection interface (like FC, SC) and also the system capacity and possible loss range.Fiber optic test equipment working environment can be the factor you should look at, if you are likely to utilize the fiber test equipment outdoor or indoor, the gear working temperature, power source, battery life.

soure from:A Kind Of Fiber Test Equipment – Visual Fault Locators In Fiberstore