The Laser Safety And Warning With Cisco SFP Modules

Cisco SFP can be hot plugable, this ensure it is easy to change and straightforward for maintenance in comparison with traditional modules. SFP fiber transceiver modules make the fiber optic network or fiber-Ethernet network easier to upgrade or maintain, users can replace a single SFP module during the process as opposed to replace the whole board with a lot of modules onto it.

SFP(Small form-factor pluggable) is really a compact optical transceiver used in optical communications for both telecommunication and knowledge communications applications. Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms. Cisco pluggable transceivers offer a convenient and cost effective solution for the adoption in data center, campus, metropolitan area access and ring networks, and storage space networks. Cisco portfolio of hot pluggable interfaces provides a rich group of choices in terms of speeds, protocols, reaches and supported transmission media.

Cisco SFP can be considered the upgrade version gbic module, SFP is brief for Small Form-factor Pluggables, unlike GBIC with SC fiber optic interfaces is with LC interface as well as the main body size of SFP is just about 50 % of GBIC, making SFP space saving. Signal transmitting rate of these modules range from 100Mbps as much as 4Gbps or more, working distance of such SFP transceiver modules could be from 500 meters to 100 kilo meters, working wavelength of numerous SFP modules are typically 850nm, 1310nm and 1550nm, additionally, there are CWDM type SFP transceivers available.

Laser Safety:

Prior to deciding to install SFP modules in the Cisco device or try to operate or service a Cisco device equipped with SFP modules, you must read and take notice of the important safety information in this post. Refer to the Regulatory Compliance and Safety Information publication or the Site Preparation and Safety Guide that supports your Cisco device for your complete listing of translated safety warnings and agency approvals that affect your Cisco device.

The Cisco SFP Transceiver Modules are equipped with a category 1 Laser, which emits invisible radiation. Do not stare into open optical ports. These warnings connect with the cisco sfp modules.

Warning:

1,Class 1 laser product. 2,Because invisible laser radiation could be emitted in the aperture from the port when no fiber is connected, avoid contact with laser radiation and don't stare into open apertures. 3,Laser radiation occurs once the method is open and interlocks bypassed. 4,Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

FiberStore provides several types of SFP modules compatible cisco SFP Transceivers. Like a Alternative party OEM manufacturer, our Cisco SFP transceiver is brought to worldwide from our factory directly. Our Cisco SFP module are tested in-house just before shipment to guarantee that they'll get to perfect physical and dealing condition.Thank you for visiting Fiberstore.com get your fiber optic products.We're the key fiber transceivers supplier.