Fiberstore XFP Transceiver Chipset Connected To 10 Gbps

Fiber optic communication industry, although the construction of the world's long-distance network and the backbone network is slowed down, but with the growing demand for network capacity, the construction of the metro and access network full swing scene. The similar optical transceivers such devices has also been vigorously the development of its type and complexity are growing at an alarming rate.

Now,which fiber transceiver popular in fiber optic products.For example,Fiberstore XFP (10 Gigabit Small Form Factor Pluggable) is a hot-swappable optical transceiver, independent of the communication protocol, XFP typically size is 850nm, 1310nm or 1550nm for of 10G bps SONET / SDH, Fibre Channel, GigabitEthernet, including DWDM links. XFP contains similar SFF figures diagnosis module, but extended to provide a robust management tools.

XFP optical transceiver chipset can be connected to 10 Gbps (gigabit per second) port XFP optical transceivers are protocol-independent (PROTOCOL AGNOSTIC) chipset, its power consumption than with a parallel interface, multi-protocol (MSA)transceiver third. It also has a "hot swap" performance, which means that prior to installation, the system does not turn off the power. For rapid growth XFP optical transceiver market, ADI's XFP chipset via to reduce transceiver module send and receive interfaces jitter requirements, and can speed up the supporting reference products available to simplify the interoperability issues.

Signal Conditioning: XFP package dual signal conditioner for re-timing signals to send and receive channels module. This dual signal conditioner has unmatched low jitter performance, jitter in the OC-192 (Optical Carrier 192) 6 MUI rms (RMS), OC-192 jitter at 10 MHZ permissible error of 0.6 UI PP and jitter transfer bandwidth of 2.0 MHZ, all of these indicators are beyond the the XFP technical specification requirements.

XFP chipset consists of the following modules: transimpedance amplifier (TIA): receive channels, ADN2821 is a 3.3 V single power supply, the total cumulative noise of only 1.1 ΜA, allowing the use of standard TO-46 metal can package implementation -19 DBM receiver sensitivity. The device supports PIN diodes, power consumption to only 150 lMW and has a support XMD standard embedded optical receiver (ROSA) reference design. Laser driver: two laser drive support distributed feedback (DFB) laser, Fabry - Perot (FP) lasers and vertical cavity surface emitting laser (VCSEL).

For other XENPAK, XPAK, and X2 type 10G optical transceiver module, display most XFP optical module, compared with the other MSA is the most compact shape, XFP, allegedly also the most inexpensive cost. Has a great advantage, XFP has been following XPAK or X2, a new generation of products, motivate manufacturers to study XFP, even if it still needs an additional chip to 10-Gbit / s speed into 3.125 -Gbit / s.

At Fiberstore, we provide the Cisco 10G XFP includes XFP-10G-MM-SR,XFP-10GLR-OC192SR,Cisco XFP-10GER-OC192IR,XFP-10GZR-OC192LR,XFP-10GZR-120 and so on.All of our XFP transceivers are 100% appropriate for famous labels like Cisco, HP, Juniper XFP, Nortel, Force10, D-link, 3Com, and backed with a lifetime warranty. Buy with full confidence. We can customize optical transceivers to suit your specific requirements.Do you know more XFP transceivers info? If you interesting in Fiber Optic Transceiver, welcome to research in fiberstore.