Are you searching for X2 Transceivers Or XFP Transceivers

Are you looking for X2 transceivers or XFP transceivers? If so,to know some information with them and then ahead to know where and how you can get transceivers at very reasonable rates.

X2 was optical transceiver module class, And the XFP was optical transceivers class. These two types of optical modules reflects two different design ideas, both have their advantages and disadvantages: the advantages of optical transceiver module is highly integrated circuit design to achieve a simple circuit design engineers can focus on system design, do not spend too much energy for the realization of the devices on the circuit; drawback is that the power consumption of large, bulky, limiting the number of optical modules installed on the PCB data products can not meet the requirements of port density. The optical transceivers advantage of small size, cheap, easy to implement high port density applications; disadvantage is the high requirements of circuit design in the ordinary circuit board to achieve a rate of 10 Gb / s, 12 in. transmission distance XFI interface.

With the advancement in technology, more and more equipment with latest techniques are being introduced everyday. This transceiver is a little form factor hot pluggable component intended for 10G system applications consisting fiber channel as well as 10Gig Ethernet.

FiberStore 10G X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available.Fiberstore supply the 10G X2 transceivers including 10GBase-sr x2,10GBase-lr x2,10GBase-er x2,10GBase-zr x2 and so on.Today,I will introduct itroduction the 10GBase-lr xfp and 10GBase-er xfp for you.

The developed recognized standard for this transceiver is referred to as XFP multi source agreement (MSA), which was introduced by various companies including Cisco XFP, Juniper XFP, Brocade XFP.FiberStore XFP transceiver is a high performance, cost effective modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s.Consistent with the original XFP multi-source agreement (MSA), these hot-pluggable transceivers have a common mechanical specification, pinout, and management interface, and connect to duplex fiber with "LC" connectors.

Fiberstore 10GBase-lr xfp is hot swappable fiber optic transceiver used for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data transfer rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is 10km. XFP-10GLR-OC192SR use dual LC fiber connector interface, its working temperature is from –5 to 70 degree centigrade, this fiber transceiver module is with uncooled 1310nm EML laser and power dissipation less than 2.5W. The XFP LR is with built in digital diagnostic functions. The 10GBase-LR transceivers operate at a 1310nm optical wavelength, and are designed for 9μm (9/125) single-mode fiber up to 10km, but are commonly used up to larger distances with high-quality fiber.

Fiberstore 10GBase-er xfp transceiver comply with XFP MSA, and can support diverse applications for SDH/Sonet equipment including FEC (9.95Gb/s to 10.7Gb/s), as well as Ethernet Lan (10.325Gb/s) and WAN(9.95Gb/s) applications. The high performance cooled 1550nm cooled EML transmitter and high sensitivity PIN receiver provide superior performance for SONET/SDH and Ethernet applications at up to 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA.

Fiberstore is a fiber optic transceivers supplier with a variety of fiber optic products in stock ready to ship to you. If you want to know more information about our high performance Cisco XFP transceivers, you can go to Fiberstore.com or contact us via sales@fiberstore.com directly.